With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 56821. Please login or register to manage your profile.

Model 56821 3-Ch 200 MHz A/D with DDC & 2-Ch 800 MHz D/A with DUC, Kintex UltraScale - AMC

Block Diagram Datasheet Manuals Literature Life Cycle Management Ordering & Warranty Catalogs

Jade Xilinx Kintex UltraScale FPGA Products and Navigator Design Suite Software Video Jade Xilinx Kintex UltraScale FPGA Family Brochure Complete radar and software radio interface solution Supports Xilinx Kintex UltraScale FPGAs Three 200 MHz 16-bit A/Ds Three multiband DDCs (digital downconverters) One DUC (digital upconverter) Two 800 MHz 16-bit D/As 5 GB of DDR4 SDRAM Sample clock synchronization to an external system reference LVPECL clock/sync bus for multimodule synchronization PCI Express (Gen. 1, 2 & 3) interface up to x8 Optional LVDS and gigabit serial connections to the FPGA for custom I/O AMC 1 compliant IPMI 2.0 compliant MMC (Module Management Controller) Ruggedized version available Synchronize up to eight modules with Model 7893 System Synchronization and Distribution Amplifier - PCIe Also available in the following form factors: Model 71821 - XMC Model 57821 - VPX 6U (single XMC) Model 58821 - VPX 6U (dual XMC) Model 52821 - VPX 3U (single XMC) Model 53821 - VPX 3U (single XMC with switch) Model 54821 - VPX 3U (single XMC with optical/backplane RF) Model 78821 - PCIe (single XMC) Model 72821 - cPCI 6U (single XMC) Model 74821 - cPCI 6U (dual XMC) Model 73821 - cPCI 3U (single XMC) Please refer to the product datasheet for Installed FPGA IP Module details

Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

A complete set of user manuals is provided in HTML format. Access to detailed documentation of the IP Core modules and their programmable registers is only available in the HTML version of the operating manual. Instructions for getting the HTML version of the user manuals is provided in the User Manual Library document listed below.

• Searching for an instruction manual or product datasheet? Request it here.

---

CONNECT ON SOCIAL:

---

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions • Site Map
Terms of Use • Privacy Policy • Copyright © 2024 Pentek, Inc. All Rights Reserved.