With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 7853. Please login or register to manage your profile.

Model 7853 4-Channel Beamformer with four 200 MHz, 16-bit A/Ds - x8 PCIe

Block Diagram Datasheet Manuals Development Systems Literature Life Cycle Management Ordering & Warranty Catalogs

Built-in Beamformer supports multiboard systems Programmable Power Meter and Treshold Detect per channel Four 200 MHz, 16-bit A/Ds 2 or 4 Channels of DDC PCI Express 2.0 (Gen. 2) Interface up to x8 wide Independent 32-bit DDC tuning for all channels DDC decimation range from 2 to 256 or from 2 to 65536 Independent decimation factors for each channel Default filters offer 0.2 dB ripple and 100 dB rejection LVPECL clock/sync bus for multiboard synchronization

Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

• Searching for an instruction manual or product datasheet? Request it here.

---

CONNECT ON SOCIAL:

---

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions • Site Map
Terms of Use • Privacy Policy • Copyright © 2024 Pentek, Inc. All Rights Reserved.