Pentek PMC/XMC Software Radio Transceivers

Model 7140 Transceiver

For more information on the 7140, click here.

Features

• Complete software radio transceiver solution. Four digital downconverters
• Two 105 MHz 14-bit A/D converters. Upconverter with two 500 MHz 16-bit D/As
• Xilinx Virtex-II Pro FPGA
• Optional installed IP cores eliminate FPGA development tasks
• XMC I/O for high-speed data streaming
• Rugged and conduction-cooled versions available
• Also available: Model 7640 PCI; Models 7340 3U and Model 7240 6U cPCI boards

Overview

Model 7140 is a software radio transceiver suitable for connection to HF or IF ports of a communications system and capable of bandwidths to 40 MHz and above.

The front end accepts two full scale analog HF or IF inputs at +4 dBm into 50 ohms with transformer coupling into 14-bit 105 MHz A/D converters.

The digital outputs are delivered into the Virtex-II Pro FPGA for signal processing or for routing to other module resources.

The 7140 includes a quad DDC and a digital upconverter with two 500 MHz D/A converters.

Model 7142 Transceiver

For more information on the 7142, click here.

Features

• Complete software radio transceiver solution
• Four 125 MHz 14-bit A/D converters
• Upconverter with 500 MHz 16-bit D/A
• 768 MB of DDR2 SDRAM
• Two Xilinx Virtex-4 FPGAs
• Optional installed IP cores eliminate FPGA development tasks
• XMC I/O for high-speed data streaming
• Rugged and conduction-cooled versions available
• Also available: Model 7642 PCI; Models 7342 3U and Model 7242 6U cPCI boards

Overview

Model 7142 is a multichannel, high-speed data converter suitable for connection to HF or IF ports of a communications system. It includes four A/Ds and one upconverter and D/A converter capable of bandwidths to 40 MHz and above.

The front end accepts four full scale analog HF or IF inputs at +10 dBm into 50 ohms with transformer coupling into 14-bit 125 MHz A/D converters.

The digital outputs are delivered into a Virtex-4 FPGA for signal processing or for routing to other module resources.

A digital upconverter and D/A accepts a baseband real or complex data stream from the FPGA with signal bandwidths up to 40 MHz.

Model 7141-703 Rugged Transceiver

For more information on the 7141-703, click here.

Features

• Complete software radio transceiver solution
• Four digital downconverters
• Two 125 MHz 14-bit A/D converters
• Upconverter with two 500 MHz 16-bit D/As
• 512 MB of DDR SDRAM
• Xilinx Virtex-II Pro FPGA
• XMC I/O for high-speed data streaming
• Sample clock synchronization to an external system reference
• Optional installed IP cores eliminate FPGA development tasks

Overview

Model 7141-703 is a software radio transceiver suitable for connection to HF or IF ports of a communications system. It includes two A/D and two D/A converters capable of bandwidths to 40 MHz and above.

The Model 7141-703 is offered as a fully conduction-cooled/rugged board meeting Pentek's L3 ruggedization level (option 703).

The front end accepts two full scale analog HF or IF inputs at +10 dBm into 50 ohms with transformer coupling into 14-bit 125 MHz A/D converters.

The digital outputs are delivered into the Virtex-II Pro FPGA for signal processing or for routing to other module resources.