Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Google Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  
Search:  
Home > What's New > Upper Saddle River, NJ - August 29, 2016

Pentek Introduces FlexorSet Turn-key Multichannel, High-Speed A/D & D/A Modules

  • Four 250 MHz 16-bit A/Ds and Two 800 MHz 16-bit D/As
  • Complete Transceiver for 100 MHz Signal Bandwidths
  • FPGA-based Digital Down Converters (DDCs) and Digital Up Converters (DUCs)
  • 3U VPX and PCIe Form Factors with Virtex-7 FPGA
  • Fully Turn-key for Immediate Operation Out-of-the-Box
Follow Us On Facebook
Follow Us On LinkedIn
Follow Us On Twitter
Follow Us On Google+
Follow Us On YouTube  

Upper Saddle River, NJ - August 29, 2016 - Pentek, Inc., today introduced new members to its FlexorSetTM series of preconfigured solutions: The FlexorSet Model 5973-313 for 3U VPX and Model 7070-313 for PCIe platforms consist of an FMC installed on either of two Flexor FMC carriers with Virtex-7 FPGAs. The Flexor Model 3312 FMC features four 250 MHz, 16-bit A/Ds and two 800 MHz, 16-bit D/As, which are supported with matching digital down converters (DDCs) and interpolation filters as intellectual property (IP) installed in the FPGA.

"These FlexorSet combinations include the most commonly required IP functions for data acquisition and signal generation applications," said Rodger Hosking, vice-president of Pentek. "Because of these pre-configured functions and supporting software, our customers can start capturing and generating signals within minutes after opening the box."

Each FlexorSet is a multichannel, high-speed data converter sub-system with highly programmable analog I/O signal interface suitable for connection to HF or IF ports of a communications or radar system, and supporting signal bandwidths up to 100 MHz. The built-in data capture and playback features offer an ideal turnkey solution as well as a platform for developing and deploying custom FPGA-processing IP.

Each includes four 250 MHz, 16-bit A/Ds using two TI ADS42LB69s. A single TI DAC5688 provides a digital upconverter and two 800 MHz, 16-bit D/As. Four banks of DDR3 SDRAM provide a generous 4 GB of storage for data processing. In addition to supporting PCIe Gen. 3 as a native interface, the Model 5973-313 and Model 7070-313 include optional copper and optical gigabit serial connections to the Virtex-7 FPGA for custom I/O.

"The FlexorSet concept saves us a tremendous amount of time in setting up our recording systems for customers," stated Chris Tojeira, director of Penteks Talon Recording Solutions. "We can integrate these into our recorders straight out-of-the-box and immediately start to capture signals, saving us a tremendous amount of development time and getting us to deployment much faster."

Bundling for Seamless Integration

Both FlexorSets come pre-configured with a suite of built-in functions for data capture, synchronization, time tagging and formatting, all tailored and optimized for the FMC and carrier. This IP enables high performance capture and delivery of data to provide an ideal turn-key signal interface for radar, communications or general data acquisition applications, eliminating the integration effort typically left for the user when integrating the FMC and carrier.

Development Tools and Software Support

FlexorSet presents system integrators with an ideal development and deployment platform for custom IP. The Pentek GateFlow® FPGA design kit gives users access to the complete factory installed IP at the source level, allowing them to extend or even replace the built-in functions.

The Pentek GateXpress® PCIe configuration manager supports dynamic FPGA reconfiguration though software commands as part of the runtime application. This provides an efficient way to quickly reload the FPGA, which slashes development time during testing. For deployed environments, GateXpress enables reloading the FPGA without the need to reset the host system, ideal for applications that require dynamic access to multiple processing IP algorithms.

The Pentek ReadyFlow® Board Support Package is available for Windows and Linux operating systems. The ReadyFlow C-callable library contains a complete suite of initialization, control and status functions, as well as a rich set of precompiled, ready-to-run-examples, to accelerate application development.

With a Pentek 8266 SPARK PC development system or a 8267 SPARK 3U VPX development system, work can begin immediately on applications. The SPARK system saves engineers the time and expense associated with building and testing a development system and ensures optimum performance of Pentek boards. All SPARK development systems come with software and hardware installed and ready for immediate operation. In many applications the SPARK development system can become the final deployed application platform.

Pricing and Availability

For the latest pricing, delivery and available options, please fill out this form and your request will be delivered to the appropriate department. To learn more about our products or to discuss your specific application please email our sales department at sales@pentek.com, contact your local representative or Pentek directly:

Mario Schiavone
Sales Director
Pentek, Inc.
One Park Way
Upper Saddle River, NJ 07458
USA
Tel: +1 (201) 818-5900
Fax: +1 (201) 818-5904
sales@pentek.com
Map + Directions

Product Detail

Photos and Attachments



Media contact:
Barbara Stewart, Patterson & Associates
39810 N 105th Way, Scottsdale, AZ 85262
Tel: +1 (480) 488-6909
Email: barbara@patterson.com




CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On Google+ Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions
Site Map • Copyright © 2017 Pentek, Inc. All Rights Reserved.