Home > What's New > Upper Saddle River, NJ - October 11, 2011 |
"The Model 71651 handles a tremendous breadth of communications and radar signals," commented Rodger Hosking, vice president of Pentek. "With its high speed data converters and digital up/down converters, tuning bandwidths range from 10 kHz to 240 MHz, two and a half times our previous modules." Hosking also pointed out that the 71651 FPGA is preconfigured for use out of the box. "Our embedded IP was inspired by what our customers most often require for their applications. We're simply giving them a quick start towards their final configuration."
The Model 71651 features two input and two output RF channels, transformer-coupled to allow direct connection to HF or IF radio stages. The input channels feature 12-bit, 500 MHz A/Ds that feed data into the Virtex-6 FPGA. The output channels incorporate a Texas Instruments DAC5688 digital upconverter that translates real or complex baseband signals to any IF frequency up to 380 MHz. Dual 16-bit, 800 MHz D/As create real or in-phase (I) and quadrature (Q) analog outputs.
In addition to the DDCs, the 71651 features a complete beamforming subsystem. Each DDC core contains programmable I and Q phase and gain adjustments followed by a power meter that continuously measures the individual average power output and performs threshold detection. A programmable summation block handles any of the three DDC core outputs, automatically compensating for summation bit growth. For larger systems, multiple 71651 modules can be chained together via a built-in Xilinx Aurora 4X gigabit serial interface.
The D/A Waveform Playback Module provides a linked-list controller so users can easily deliver waveforms stored in on-board or host memory to the D/As. Up to 64 individual link entries can be chained together to create complex waveforms with a minimum of programming. Parameters for each waveform include length of waveform, delay from playback trigger, waveform repetition, plus the link to the next waveform.
Users can also implement their own IP in the 71651's FPGA using Pentek's GateFlow FPGA design kit. Boards can be populated with a variety of FPGAs to match the specific requirement of the processing task.
Pentek's ReadyFlow Board Support package for Windows, Linux or VxWorks operating systems includes C-callable libraries, drivers, and example code for easy access to all of the features. The Signal Analyzer features a virtual oscilloscope and spectrum analyzer for viewing live data streaming from the 71651, straight out of the box. A command line interpreter allows customers to change module parameters to check operation and performance on the Signal Analyzer without having to compile C code.
Pentek also offers cPCI, PCIe, VPX and ruggedized, extended-temperature versions of the 71651.
For the latest pricing, delivery and available options, please fill out this form and your request will be delivered to the appropriate department. To learn more about our products or to discuss your specific application please contact our sales department at SDL-sales@mrcy.com, 201-818-5900 or contact your local representative.
CONNECT ON SOCIAL: |