3
Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  
Search:  
Home > Products > Model 7142

Your Pentek With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 7142. Please login or register to manage your profile.

Model 7142 4-Channel A/D, 1-Channel D/A with Virtex-4 FPGAs - PMC/XMC

Not recommended for new designs. Contact Pentek for more information.

Block Diagram

Datasheet

Manuals

Software

Literature

Life Cycle Management

Ordering & Warranty

Catalogs

Free Lifetime Support

 
  • Complete software radio interface solution
  • VITA 42.0 XMC compatible with switched fabric interfaces
  • Four 125 MHz 14-bit A/Ds
  • One digital upconverter
  • One 500 MHz 16-bit D/A
  • 768 MB of DDR2 SDRAM
  • Xilinx Virtex-4 FPGAs
  • Up to 2.0 seconds of delay or data capture at 125 MHz
  • Dual timing buses for independent input and output clock rates
  • LVDS clock/sync bus for multi-module synchronization
  • 32 pairs of LVDS connections to the Virtex-4 FPGA for custom I/O on P4
  • Optionally factory-installed IP cores available

 

Model 7142

 

Model 7142 Block Diagram

Please refer to the product datasheet for a larger version of the block diagram


Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

Part No.
Type
Description
Revision/Date
800.71420 Operating Manual Model 7142 Four Channel A/D with DAC PMC/XMC Module B.10 (2/9/2010)
800.71421 Addendum 7x42 Series Xilinx Programming Instructions A (11/18/2008)
801.71420 Installation Guide Model 4999 Option 142, ReadyFlow Board Support Libraries for Model 7142 1.1 (3/18/2008)
801.71421 Programmer's Reference Model 4999 Option 142, ReadyFlow Board Support Libraries for Model 7142 1.1 (3/18/2008)
803.71400 User's Guide Model 4996 Option 140/141/142, VxWorks Driver for Model 7140/7141/7142 2.3A (1/18/2008)
805.71400 User's Guide Model 4995 Option 140/141/142, Windows Driver for Model 7140/7141/7142 2.3B (1/18/2008)
806.71400 User's Guide Model 4994 Option 140/141/142, Linux Driver for Model 7140/7141/7142 2.3A (1/18/2008)
809.7x420 Supplemental Manual Vendor Data Sheets for Model 7x42 Series Operating Manuals A (11/18/2008)
813.71420 User's Guide Model 4996A Option 142 VxWorks ReadyFlow BSP for Model 7142 1.1 (3/6/2009)
815.71420 User's Guide Model 4995A Option 142 Windows ReadyFlow BSP for Model 7142 1.0 (6/5/2012)
816.71420 User's Guide Model 4994A Option 142 Linux ReadyFlow BSP for Model 7142 1.1A (6/8/2009)
820.71420 User's Guide Getting Started Guide for Model 7142 A (10/7/2010)
Contact Pentek
For Manual
Model 4953 GateFlow FPGA Design Kit for Pentek Modules for Model 7142

Software Products - ( top )

Model
Option
Description
4953 142 GateFlow FPGA Design Kit for Pentek Modules



CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions • Site Map
Terms of Use • Privacy Policy • Copyright © 2024 Pentek, Inc. All Rights Reserved.